How to Put an Iron on Patch on a Backpack

How to Put an Iron on Patch on a Backpack? Easy Way To Make Your Pack More Beautiful

Putting the patches on your backpack requires proper guidelines in order to get clean-looking and long-lasting results. If you are willing to put the patches on your pack but don’t know how to put an iron on patch on a backpack? we will show you how to do that.

The two most common materials for patches are embroidered, while the other is woven patches with a flat surface. 

By taking a few precautionary measures and some steps, you can achieve the best results by putting the patches on your backpack.

Sewing the patches to the surface is also used as a method to set the patch on a bag but it has some drawbacks. 

 In order to get the best results from putting a patch on your backpack, we have summarized the method in a few easy steps. The guide below has listed proper guidelines and protective measurements and elaborately explained. 

How to Put an Iron on Patch on a Backpack

How to Put an Iron on Patch on a Backpack, Let’s Dive Inside

Set the Clothing:

Before getting started with the process of putting Iron on the patch, you will need to check the clothing first. Check the material tag and make sure that it can be ironed.

Make sure that the material is ironed and wrinkle-free. If needed, you can use Iron. A dry, clean and smooth surface is preferred.

Decide where to put the patch on the backpack. If the pack has some patches already, make sure to put this where it will look prominent. 

Set the Right Temperature:  

Look for the perfect settings of the Iron according to the cloth type. For the patch to stick to the backpack, you need a temperature that suits the fabric.

If the fabric’s suitable temperature is unknown to you, you can heat it from 138 to 152 Celsius. Make sure to check the patch after pressing it to avoid the risk. 


Best Air Travel Bag With Laptop Facility.

How Can You Unstuck The Zipper of Your Backpack.

Iron the Selected Area:

Having the temperature set, you are now ready to start ironing. Iron the selected area with low pressure in a circular motion for 15 to 20 seconds.

This will start warming up the area where the patch has to be placed. Now, place the patch over the warmed-up area and cover it with a light piece of fabric.

Small pieces of clothes such as a pillow cover or a handkerchief could be used. Make sure that you utilize a flat and dry surface with much space available.  

Check the Quality:  

After ironing, take off the cover and check the patch attached to the fabric. Make sure that it is not too hot as it can burn your fingers.

The patch should be well glued from around, and no edges should turn up. If the patch is not well stuck to the surface, you should repeat the process one more time for about 1 minute.

Make sure not to use the circular motion this time, as it can damage the already glued parts of the patch.  

Iron the other Side:  

Check the stickiness of the patch to the surface. Half of the work is done if the patch has ultimately held on to the surface.

Now, place the fabric on the back of a piece of clothing and repeat the process. Pressing the cloth upside down will start melting the glue in the opposite direction.

This is to make sure that the patch is glued from all directions. Take 30 seconds to iron the patch from this site.  

 Let it Cool:  

After pressing from both sides is complete, remove the cloth and have a closer look at the article of the fabric. If the patch is perfectly glued, keep it cool for at least a minute.

Be cautious about the temperature. If the patch has not been glued, you may consider sewing the patch this time.  

Related FAQs About How to Put an Iron on Patch on a Backpack? 

How can you Iron a Patch on a Polyester Backpack? 

Apply the suitable heat and make slow motions on the patch for 40 to 50 seconds until the glue melts. Now, lift the edges. If the patch is not well stuck, repeat the process.   

Can Nylon be used to Iron the Patch onto? 

 Be cautious when ironing nylon. The melting point of nylon is comparatively low therefore gets the right temperature.

The patch does not necessarily get stuck to the rucksack flexes, although it depends on the quality of the adhesive being used. 

Can you Iron Patches to the Jansport Backpack?

Ironing on the polyester and cotton fabrics can be applied only. The patches cannot be applied to nylon, rayon, leather, or similar materials.  


 Learning how to put an iron on patch on a backpack? is easy and quick. Set the clothing by checking the material of the cloth, its smoothness, and cleanliness.

Set the right temperature for ironing the clothes, which is 130 to 150. Heating the Iron, now press the cloth in a round pattern.

After pressing, check the patch from all sides. If edges are still not stuck, repeat the process. After ironing one side, turn the cloth, and press the other side of the fabric.

After the ironing of both sides, make sure that the patch has appropriately stuck and wait for it to cool down. Your patch is ready. 

Scroll to Top